Search results

Optimized plating conditions, included proper designs of insulating shield (IS), auxiliary cathode (AC) and different patterns, contribute to the uniformity enhancement of copper deposition.

Plating experiments were implemented in vertical continuous plating (VCP) line for manufacturing in different conditions. Multiphysics coupling simulation was brought to investigate and predict the plating uniformity improvement of copper pattern. In addition, the numerical model was based on VCP to approach the practical application.

With disproportionate current distribution, different plating pattern design formed diverse copper thickness distribution (CTD). IS and AC improved plating uniformity of copper pattern because of current redistribution. Moreover, optimized plating condition for effectively depositing more uniformed plating copper layer in varied pattern designs were derived by simulation and verified by plating experiment.

The comparison between experiment and simulation revealed that multiphysics coupling is an efficient, reliable and of course environment-friendly tool to perform research on the uniformity of pattern plating in manufacturing.

As a common transmission line, the microstrip line plays an important role in high-speed circuits. The purpose of this paper was to investigate the effects of the circuit design of microstrip lines on the signal integrity (SI). In addition, the influence of the type and thickness of the solder resist ink on SI was analyzed to provide guidance for the related producing process design of printed circuit boards (PCBs).

Microstrip line properties consisting of shape, line-width/line-space ratio, reference layer design and as-covered solder resist ink were designed to measure the insertion loss (S₂₁) in high-speed PCB.

The study showed that the insertion loss (S₂₁) of straight, meander, snake-shaped and wavy microstrip lines was approximately consistent. A microstrip line with width/space ratio less than 0.96 is necessary, as the differential line closing produces a mutual interference. Reference layer including the discontinuous area should be repaired by adjusting the microstrip line parameters. With regard to the solder resist ink, the insertion loss of novel solder resist ink decreased by 0.163 dB/in at 12.9 GHz and 0.164 dB/in at 14 GHz, compared with traditional solder resist ink. Accordingly, the insertion loss effectively improved at a lower thickness of solder resist.

This paper demonstrated that the common designing factors of line shape, line/space ratio, reference layer and solder resist influence microstrip line SI in the significant reference of designer-making PCB layout.

The purpose of this paper is to form high density interconnection (HDI) of backboard for press-fit applications with the pre-curing conditions of conductive paste. The best condition of pre-curing conductive paste should be found to obtain good electrical and physical performance of the conductive paste and avoid the simultaneous curing behavior of prepreg.

A novel structure of backboard was designed by using the connection of conductive paste-filled through holes to connect two multilayers. Pre-curing conditions of conductive paste were investigated to find their effects on resistance, bond strength and volume shrinkage. The reliability of pre-curing conductive paste was also analyzed.

Pre-curing conditions led to a great influence on the resistance, bond strength and volume shrinkage of the conductive paste. The best condition of pre-curing conductive paste was chosen as the low curing temperature of 60°C and a curing time of 30 min. Cured conductive paste exhibited square resistance of 4.205 mΩ/□ and bonding strength of 22.86 N. The as-obtained pre-curing condition could improve the reliability of conductive paste. Pre-curing process of conductive paste at extremely low temperature to interconnect two multilayer structures improved the density interconnection of backboard for press-fit applications.

The use of HDI of backboard could lead to good assembly for high-speed signal transmission of electronic products with press-fitting components. The connection of pre-curing conductive paste for multilayers could have important function for improving the application for communication backboard.

This study aims to focus on the surface curvature, jet to target spacing and jet Reynolds number effects on the heat transfer and fluid flow characteristics of a slot jet impinging on a confined concave target surface at constant jet to target spacing.

Numerical simulations are used in this research. Jet to target spacing, H/B is varying from 1.0 to 2.2, B is the slot width. The jet Reynolds number, Rej, varies from 8,000 to 40,000, and the surface curvature, R2/B, varies from 4 to 20. Results of the target surface heat transfer, flow parameters and fluid flow in the concave channel are performed.

It is found that an obvious backflow occurs near the upper wall. Both the local and averaged Nusselt numbers considered in the defined region respond positively to the Rej. The surface curvature plays a positive role in increasing the averaged Nusselt number for smaller surface curvature (4-15) but affects little as the surface curvature is large enough (> 15). The thermal performance is larger for smaller surface curvature and changes little as the surface curvature is larger than 15. The jet to target spacing shows a negative effect in heat transfer enhancement and thermal performance.

The surface curvature effects are conducted by verifying the concave surface with constant jet size. The flow characteristics are first obtained for the confined impingement cases. Then confined and unconfined slot jet impingements are compared. An ineffective point for surface curvature effects on heat transfer and thermal performance is obtained.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.